What seal to use on floor panel's

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
R

Richard Anstee

New Member
Posts
2
Location
Leicester
Hi I'm new here and just brought my first defender, so brought my first a 1987 defender 90 with a 300tdi and on the way down the header tank split and gearbox packed up, I thought it with 300tdi and newish meant to be decent gearbox and turned out they didn't put enough oil in the gearbox on the journey home from Rochdale to Leicester I broke down 10 miles from home gearbox was locked up so ripped it out and found the floors had rotten through the seller told me to f**k off not his problem, but anyhow welded in New floor panel's but wonder what seals are beat to seal the the tunnel seat box and floors don't really wanna use silicone to make it easier when taking it apart again any information be good thanks
 
Oh, and as you’re new to Landys I’ll let you off, but you actually have a pre-Defender Land Rover Ninety ( the ‘Defender’ only came into being in ‘91 ). But to Joe public might as well be a Defender!
 
There are a few kinds....

220px-Seal_2012.jpg


Or a more traditional
seals055.jpg


Whichever kind you choose don't forget to......

Seal it with a loving kiss.
 
You must log in or register to reply here.

Similar threads

N
Clutch problem unable to change gear
Replies
10
Views
2K
Anaconda
A
Flossie
Lost me clutch, thoughts? Found the fault with a pic.
Replies
19
Views
2K
KISSMYAURA
KISSMYAURA
E
Freelander 1 Fitting new crankshaft rear oil seal and oil sump gasket to L series
Replies
1
Views
1K
GrumpyGel
GrumpyGel
C
Diff lock stuck after clutch arm
Replies
4
Views
696
Scooby22
Scooby22
S
300Tdi clutch
2
Replies
39
Views
6K
Anaconda
A
Back
Top