I just changed the oil, fuel air and oil filters very easy an hour tops and 30 mins of that was waiting for the oil to drain. What else should i be doing ? the disco has been very well maintained by the previous owner any ideas if there is anything preventative i should do ?
what next ?
- Thread starter palace
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
GRATCH
HUGE MEMBER
- Posts
- 15,501
- Location
- North Cheshire
gearbox, transfer box, front and rear diff oils . swivel housings one shot grease. waxoil chassis and underbody. etc
Richard Martin
Well-Known Member
- Posts
- 1,371
- Location
- Cardiff
grease UJ and propshaft, clean fuel sedimenter
get a Haynes manual
get a Haynes manual
trax99
Well-Known Member
- Posts
- 1,149
- Location
- Montgomeryshire
yet more waxoyl
and then more
and then more
Richard Martin
Well-Known Member
- Posts
- 1,371
- Location
- Cardiff
grease UJ and propshaft, clean fuel sedimenterlet me rephrase
EASY ONES
get a Haynes manual
__________________
are all easy
- Posts
- 760
- Location
- Staffordshire
very easy and very worth while
Richard Martin
Well-Known Member
- Posts
- 1,371
- Location
- Cardiff
Old one off, smear the seal in the new one with diesel and new one on, the 300TDI is pretty good at self priming
just started it and it ran sweet as a nut it was very very easy to do the jobs I have done so far
sedimenter is next on the list do i need any special tools to grease the UJ and propshaft ?
A grease gun would help
Propeller shaft Front and Rear
Lubrication nipples (hubs, ball joints etc.)
Seat slides Door lock striker
NLGI - 2 Multi-purpose Lithium based GREASE
Similar threads
