Hicap phill
Well-Known Member
- Posts
- 17,007
- Location
- Wiltshire
Once the engine is out the motor is light enough to roll back. Do the engine work then roll back into place
What have you done to your Landie today.
- Thread starter madfrank
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
doriz
Well-Known Member
- Posts
- 17,394
I might buy some rollers so I can bully the thing round
or I might just buy a poly tunnel and then use it for next years pepper crop 
6pot
Well-Known Member
- Posts
- 773
- Location
- Depends...
Looks great, hope the trip goes well.Just passed MOT and taxed. This after an 18mth/1600hr rebuild/refurbishment. I super chuffed, it's been bloody hard graft...lots of blood, sweat, some terrible use of English...and a much reduced bank balance. Now good to go to the French Alpes at sparrow's fart this Thursday morning...
Have you got a GB sticker on the back (soon to be 'UK' I hear)? It amazes me the number of British cars I see in Europe with neither a Euro plate (no longer valid) or a GB sticker. You don't want to get stopped for something as trivial as that.
congo181
Well-Known Member
- Posts
- 528
- Location
- Maidstone, Kent, U.K.
I’ve been prepping the first wing for the respray today. Never painted before so taking it nice and steady.
I’ve also finally finished all the bulkhead repairs, removed all the wiring and bits and pieces from both sides of the bulkhead as well as the seats from the cab. Next stage will be lots of sanding.
v8250
Well-Known Member
- Posts
- 6,872
- Location
- Deepest Darkest...
Thanks @6pot, I still need to pick up one of these + the headlight deflector strips...sounds like a trip to Halfords today
Hicap phill
Well-Known Member
- Posts
- 17,007
- Location
- Wiltshire
Get the kitThanks @6pot, I still need to pick up one of these + the headlight deflector strips...sounds like a trip to Halfords today
You need spare bulbs,triangle & hi viz.
6pot
Well-Known Member
- Posts
- 773
- Location
- Depends...
Sometimes two triangles (i.e. one the same distance in front as well) not sure about the specific rule in France but many countries say two.
Also one hi viz per occupant of the vehicle.
v8250
Well-Known Member
- Posts
- 6,872
- Location
- Deepest Darkest...
Thank guys, have all the legal widgets incl' breathalyser, spare bulbs + marmite sandwiches, rhubarb crumble & custard, 2x thermos of strong tea & coffee
Plus, will be completing first oil & filter change at service station just north of Dijon. If anyone's in the area feel free to come and lend a hand
Plus, will be completing first oil & filter change at service station just north of Dijon. If anyone's in the area feel free to come and lend a hand
congo181
Well-Known Member
- Posts
- 528
- Location
- Maidstone, Kent, U.K.
Took the seat box out tonight to get access to change the front in bolts and to get to the chassis under the cab for painting.
FeistyFreelander
Member
- Posts
- 49
- Location
- Windsor
Just used AIRCON Bomb to clear out any old junk left by previous users....
and a couple of bolts had come loose on the rear sub in the boot so replaced and touched up the paint on the wood panel its bolted to....looks pretty good to me in there now
And Plugged in an ELM327 Bluetooth adapter, connected it to Car Scanner, seems to work, will have to keep monitoring, it reads speed and voltage blah blah, and says no codes...and as i am not aware of issues I assume thats correct lol
and a couple of bolts had come loose on the rear sub in the boot so replaced and touched up the paint on the wood panel its bolted to....looks pretty good to me in there now
And Plugged in an ELM327 Bluetooth adapter, connected it to Car Scanner, seems to work, will have to keep monitoring, it reads speed and voltage blah blah, and says no codes...and as i am not aware of issues I assume thats correct lol
Last edited:
the_wolf
Well-Known Member
- Posts
- 16,852
- Location
- Stonehouse, Scotland
Passed its MOT with flying colours, not even an advisory
congo181
Well-Known Member
- Posts
- 528
- Location
- Maidstone, Kent, U.K.
Been working on the bonnet this weekend.
adrian hogg
Well-Known Member
- Posts
- 410
- Location
- WEST MIDLANDS
Trumar
Active Member
- Posts
- 141
- Location
- Hemel Hempstead
Afternoon discmikey, I read that you adjusted bulkhead, apologies for being a pain but how do you adjust the bulkhead please? I have just had new door pillars and and door sills fitted I’m not to sure how to line up the bulk head, doors and front wings with the rear tub? Thanks Mark
leonbeavan
New Member
- Posts
- 3
- Location
- United Kingdom
I just had mine re-coated due to a mild collision with another SUV. Fortunately, The other party is real apologetic and with a few talks, we managed to settle the matter as pleasant as possible. Safe travels everyone!
FeistyFreelander
Member
- Posts
- 49
- Location
- Windsor
Decided to give the headlights a very quick polish...only used G3 but think look a lot better and will do further another day...
only took pics of before on passenger side as wasnt convinced would work before i did drivers lol
so before...
Drivers after
Passenger After
The front now...definitely brighter to my eyes...
only took pics of before on passenger side as wasnt convinced would work before i did drivers lol
so before...
Drivers after
Passenger After
The front now...definitely brighter to my eyes...
6pot
Well-Known Member
- Posts
- 773
- Location
- Depends...
Good results, G3 is quite good stuff really.
6pot
Well-Known Member
- Posts
- 773
- Location
- Depends...
Had a bit of a tidy up today and found that the rats are back. Damned Britpart handbrake gaitor which disintegrated after about 2 years, I only replaced it to keep them out.
The main problem I have with rats is the damage they do, such as this:
I'll have to pull it apart and check to see if anything has been chewed inside.
The main problem I have with rats is the damage they do, such as this:
I'll have to pull it apart and check to see if anything has been chewed inside.
ryan_1993
Active Member
- Posts
- 148
- Location
- United Kingdom
Picked up my first Landy on Saturday a 1999 90 CSW 300 TDI.
Spent the last few days cleaning it up took all the seats and carpets out and gave it a thorough polishing on the outside.
overall in love with it, a few little niggles but been told it’s a great example overall.
current resolution
Spent the last few days cleaning it up took all the seats and carpets out and gave it a thorough polishing on the outside.
overall in love with it, a few little niggles but been told it’s a great example overall.
current resolution
My Old Landy
Keep breathin'
- Posts
- 9,158
- Location
- North Lincs
A really nice looking beast!Picked up my first Landy on Saturday a 1999 90 CSW 300 TDI.
Spent the last few days cleaning it up took all the seats and carpets out and gave it a thorough polishing on the outside.
overall in love with it, a few little niggles but been told it’s a great example overall.
current resolution
Similar threads
