What have you done to your Freelander today

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
bukko said:
To be fair it's been mainly motorway at 50-60 mph, but still...

I'm going to have to do a proper test now, just to satisfy my curiosity.
I'll fill it to the brim tomorrow and zero the odo, then check the miles and fuel it takes at the following fill up, unless anyone knows a better way?
Click to expand...

Don't do it.... Stick with 32 :)
 
Been towing this little friend today for my mothers uncle(the guy behind the lift). 1990kg, no problems at all until i was gonna reverse it up a little hill/driveway. The trailer started to brake. Regret i didnt take pictures of the gravel driveway. I had to push it with the trailer wheels locked most of the way :D

PgmiZd.jpg
 
Last edited:
Passed its mot with no problems, smoke readings near the limit, but have found a small split in one of the turbo pipes.
Total mileage since last mot, 1590.
 
JRNORWAY said:
Been towing this little friend today for my mothers uncle(the guy behind the lift). 1990kg, no problems at all until i was gonna reverse it up a little hill/driveway. The trailer started to brake. Regret i didnt take pictures of the gravel driveway. I had to push it with the trailer wheels locked most of the way :D
Click to expand...

I was looking to hire a cherry picker like that to cut back some trees here - damm expensive things.

Was there not a little lever by the tow hitch that you move over so that you can reverse without the trailer's brakes coming on?
 
GrumpyGel said:
I was looking to hire a cherry picker like that to cut back some trees here - damm expensive things.

Was there not a little lever by the tow hitch that you move over so that you can reverse without the trailer's brakes coming on?
Click to expand...

That is possible and sounds plausible. Things would have gone a lot smoother if i knew that. Im gonna tow it back on monday. So will look for that lever then.

He paid 200£ for the weekend.
 
Last edited:
Synergy 2, K&N (against my better judgement), Genuine LR side steps, rear window guard.

Not a cheap week!

Ye Gods, that Synergy box hasn't half made a difference!
 
I drove my first Freelander 1 today! Yes it's true. Just a quiet jaunt around the block to make sure it all works. It rides well and it's nice and quiet inside too. Found that the VCU is stiff when reversing on lock :( I'll drop the prop' shaft in the next day or so. Then new tyres and make it legal.
 
Changed the bracket for the exhaust front pipe. Old one was broken, and previous owner had tried to weld it - not with much luck (see attachment), giving an annoying rattle sound at low rpm's. All is good now :)
 

Attachments

  • knaekket_beslag.jpg
    knaekket_beslag.jpg
    160.4 KB · Views: 167
JRNORWAY said:
Been towing this little friend today for my mothers uncle(the guy behind the lift). 1990kg, no problems at all until i was gonna reverse it up a little hill/driveway. The trailer started to brake. Regret i didnt take pictures of the gravel driveway. I had to push it with the trailer wheels locked most of the way :D

PgmiZd.jpg
Click to expand...

just out of interest. But is that a drive wheel in front of the trailer wheel?
 
You must log in or register to reply here.

Similar threads

B
Freelander 1 Freelander prop bearings replacement td4
Replies
15
Views
566
andyfreelandy
andyfreelandy
O
Freelander 2 diff removal
Replies
7
Views
301
Nodge68
Nodge68
andyfreelandy
Other New Project starting today
Replies
3
Views
308
Alibro
Alibro
P
2006 Facelift TD4 Auto turbo vacuum boost solenoid
Replies
11
Views
543
andyfreelandy
andyfreelandy
P
Freelander 2 4wd problems
Replies
3
Views
648
pauld2296
P
Back
Top