What have you done to your Freelander today

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
use7y6y6.jpg
2apu9e6u.jpg

Fitted it's winter boots. Takes some getting use to the skinny looking wheels but they should be ok for winter and mud :)
 
I thought that with a 40mm lift you didn't need to do any extra modifications.

Sounds like I'm wrong.

I'm planning on fitting one of his kits shortly, so will attempt to do a pictorial guide at the same time.
 
freelandie71 said:
Same here.
Click to expand...

Trim removal is a doddle..... In the boot, remove the plastic strip across the back of the boot, under a closed door, 6x torq screws then both side pods which is 1 self tapper, 4 quarter turn fasteners and a couple of clips.
Under the bonnet, the fuse box needs removing including a number of plugs and what I believe as the aircon/cabin temperature control box including 2 or 3 plugs. On the drivers side the coolant header tank needs moving aside
 
Spacemonkey... said:
I still believe you don't with 40mm, but 50mm+ you certainly do! Camber bolts could be an idea though..

Nice tyres above!
Click to expand...

I think on some vehicles you get away without trimming a few mm off the inner, I literally took out 3-5mm so the steering rods clear with the suspension fully down, prob won't need doing unless you plan straddling ruts, bouncing through large pot holes off road when it might bottom out and lock up your suspension
 
ChrisHughes said:
I didn't fancy dropping the rear brakes and hub, save on bleeding brakes afterwards. Yeah I filed down the front inner wing about 3-5mm to allow the tracking adjustment nut to clear when suspension fully hung down.
Not got that tracking done yet....will be done shortly before any serious mileage. JC600 did you bother with camber pins or get near enough just by being tracked?
Click to expand...

Yeah, I fitted camber bolts, aligned by eye....then took it to get full alignment and tracking done. :)
 
ChrisHughes said:
I didn't fancy dropping the rear brakes and hub, save on bleeding brakes afterwards. Yeah I filed down the front inner wing about 3-5mm to allow the tracking adjustment nut to clear when suspension fully hung down.
Not got that tracking done yet....will be done shortly before any serious mileage. JC600 did you bother with camber pins or get near enough just by being tracked?
Click to expand...

Spacemonkey... said:
Yep, nothing new there- just threads asking about lift kits, then degrading into the usual 'witty' comments about getting a Disco, burning it, scrapping it etc etc... not much help really... ;)

So, JC600, if you know of a pictorial, then please let me know and I'll send you an online virtual bottle of moonshine... :5bcheers2:
Click to expand...

Muddy oval seems to of closed down, I'll see if I can find an archived file. :)
 
I have no idea what you guys are talking about.
Is there a good guide on lift kits/camber bolts etc. somewhere?

And yes, I know how the search button works. I'm not into jigsaw puzzles though.

Thanks :)
 
Last edited:
No worries, I'll have a look some point. Need to upgrade my speakers so would have some ready at the same time if they came off together!
 
You must log in or register to reply here.

Similar threads

B
Freelander 1 Freelander prop bearings replacement td4
Replies
15
Views
544
andyfreelandy
andyfreelandy
O
Freelander 2 diff removal
Replies
7
Views
274
Nodge68
Nodge68
andyfreelandy
Other New Project starting today
Replies
3
Views
290
Alibro
Alibro
P
2006 Facelift TD4 Auto turbo vacuum boost solenoid
Replies
11
Views
507
andyfreelandy
andyfreelandy
P
Freelander 2 4wd problems
Replies
3
Views
629
pauld2296
P
Back
Top