What have you done to your Freelander today

Dangermike · Feb 10, 2014

thequeenscheese said:
Fitted the single din pocket (decided against cup holder as couldn't find a suitable one) and uss the satnav on the new dojble din

[/URL][/IMG]

[/URL][/IMG]

Never seen the heater controls and switches with out anything next to the hazard switch!

thequeenscheese · Feb 10, 2014

Pauper commercial lol

gemsdad · Feb 11, 2014

GrumpyGel said:
Does that come with a free door?

they are expensive those handles,for some unknown reason.

thequeenscheese · Feb 11, 2014

Woohoo its snowinv ere greater Manchester now nust for it to settle seejng as i cant vet to work with the bloody weather..

gemsdad · Feb 11, 2014

thequeenscheese said:
Woohoo its snowinv ere greater Manchester now nust for it to settle seejng as i cant vet to work with the bloody weather..

where abouts,aint snowing where i live??

thequeenscheese · Feb 11, 2014

Stopped now tut.. Newton for hyde

gemsdad · Feb 11, 2014

thequeenscheese said:
Stopped now tut.. Newton for hyde

hyde as in stockport hyde??

pardec · Feb 11, 2014

no snow ere in didsbury

gemsdad · Feb 11, 2014

pardec said:
no snow ere in didsbury

tis lovely and sunny here in wigan.

kevins · Feb 11, 2014

gemsdad said:
tis lovely and sunny here in wigan.

sunny in blackpool but bloody cold still

gemsdad · Feb 11, 2014

kevins said:
sunny in blackpool but bloody cold still

the sun is streaming through the windows here,lovely and warm.

matt1295 · Feb 11, 2014

My crankcase breather arrived today from BMW and got stright on with fitting

while taking the cover off i noticed a long (possibly) Vacuum pipe had be chaffing on the metal part under where the pipe goes into the filter

thequeenscheese · Feb 11, 2014

my egr blanking kit came so ill be needing the advice shortly.. (i know theres a thread but its a tad long now for the basic instructions..

ive also made my satnav voices louder with soundforge so i can hear them

PlattyR56 · Feb 12, 2014

Fitting the EGR is a piece of p!ss.

Cleaning out the inlet manifold however........

rossymtb · Feb 12, 2014

Today after work here in Wales with major gusty winds and hammering rain, I replaced my vcu on the drive. Finished work at 5:30 and got straight to it.
only just finished 10pm and it drives like new. no longer very tight on full lock and it doesn't scrub tyres.
Well worth smashing my hand in with a hammer and chisel.

rossymtb · Feb 12, 2014

thequeenscheese · Feb 12, 2014

PlattyR56 said:
Fitting the EGR is a piece of p!ss.

Cleaning out the inlet manifold however........

Easy for me now the nephews garage has a peice of kit to clean the lot out

Altho its gknna costs me the garage he works at cater for a lot of taxis and they all raving about it

And i cant delete the angry face

Hippo · Feb 12, 2014

rossymtb said:
Today after work here in Wales with major gusty winds and hammering rain, I replaced my vcu on the drive. Finished work at 5:30 and got straight to it.
only just finished 10pm and it drives like new. no longer very tight on full lock and it doesn't scrub tyres.
Well worth smashing my hand in with a hammer and chisel.

Well done. The sense of achievement after a repair is always a good feeling. Certainly beats getting someone else to do it.

stu1909 · Feb 13, 2014

A set of 225/70/16 Insa Turbo Rangers. Been out tonight and had a play on the lanes and they seem great! Cleaned off the wheels in all the flooded roads! ;o)

thequeenscheese · Feb 13, 2014

Sent to start the van... Click click click... Nowwaiti g for a jump to turn up so i can go to work typical first nice day we've had..
New 110ah battery on order via mates rate garage.. (after alt check obviously)

What have you done to your Freelander today

Active Member

Well-Known Member

NOT BOTHERED.

Well-Known Member

NOT BOTHERED.

Well-Known Member

NOT BOTHERED.

Active Member

NOT BOTHERED.

Active Member

NOT BOTHERED.

New Member

Well-Known Member

New Member

New Member

New Member

Attachments

Well-Known Member

Lord Hippo

New Member

Well-Known Member

Similar threads