What have you done on your 90/110/130 today?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Fitted these Radar Renegade RT+ tyres on the Defender. Very quite on road, and 3 peaks snow rated and cheap.
IMG_2161.jpeg
IMG_2151.jpeg
 
Al2O3 said:
Changed the rear discs and calipers as they were sh@gged.
Three of the caliper bolts did the usual rounding off trick.
Bought some of these from screwfix
View attachment 304413
They took one off no bother, which sorted one caliper. However, couldn't get them to hammer on the remaining two bolt heads.
Nothing for it but to get the angle grinder out.
Cut the caliper in half just behind the disc
View attachment 304414
This allowed the hub to come off.
View attachment 304415
This gave access to the top bolt head
View attachment 304416
Cut that off and access to the bottom one to cut that one off was easy.
What was left of the caliper just knocked off the studs that remained.
View attachment 304417
The next sized down bolt removing socket was a much better fit on the stud and hammered well on, so the studs came out very easily. I did give the lugs a good heating with a gas torch first though.
All back together and sorted.
View attachment 304418
Not the best day to be out working on the drive :rolleyes:
Click to expand...
Looks like a pain of a job.
Looks all a bit rusty under there, you need a few more oil leaks, that will sort it.
 
Anaconda said:
Looks like a pain of a job.
Looks all a bit rusty under there, you need a few more oil leaks, that will sort it.
Click to expand...
It was a pain. I spent yesterday afternoon trying to hammer that socket on the two seized bolts. Then went on Screwfix again and ordered a 5 pack of 1.5mm metal cutting discs for the angle grinder, because I only had stone cutting discs left. The Mrs picked them up on the way home from work. It was very easy to cut the caliper up. If I'd had the discs already I would have saved half a day :rolleyes:
 
Yesterday picked up the Christmas trees, one eight foot, one five foot, from the local Mole Country Store. The best thing about Mole stores is the price of their trees. £50.97 for the two. Bargain...plus we get some great looks of "ooooh's..." and "aaaaaah's..." from the locals out shopping as we pass by with the rear of tilt rolled up two trees hanging out the back.

One of the great things using the Ninety for Christmas tree duties is it's guaranteed there'll be other Landy owners there too. Yesterday there were another four owners doing the same and it always sparks up conversation. What should be a 40min trip ends up a good hour+ of social fun.
 
Last edited:
Loaded a couple of spades inot the back and spent a couple of hours digging trenches from our flooded lane across verges to ditches to allow the water to drain away. Doing our local councils job for them. Hoping for a council tax rebate.
 
You must log in or register to reply here.

Similar threads

F
What have you done with your series today?
Replies
4
Views
883
Frustrated Seriesist
F
Blob
L322 Let's have your technical opinions then. Coolant leak and cracked manifold?
2
Replies
24
Views
3K
Blob
Blob
Hippo
What have you done to your tratter today?
2 3 4
Replies
70
Views
6K
IamRobbie
IamRobbie
Hippo
What have you done to your tratter today?
2
Replies
35
Views
3K
dominicbeesley
dominicbeesley
E
What a great day :)
Replies
10
Views
2K
payydg
payydg
Back
Top