1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Welcome To LandyZone!

    LandyZone is the biggest Land Rover forum on the net. We have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.

    Registering is free and easy just click here, we hope to see you on the forums soon!

what exhaust for 200tdi conversion

Discussion in 'Series Land Rovers' started by peter8315, Jun 11, 2014.

< Previous Thread | Next Thread >
  1. peter8315

    peter8315 Active Member

    Joined:
    Dec 16, 2010
    Posts:
    724
    Likes Received:
    20
    Location:
    Ilkeston, derbyshire
    just got engine fitted and wondering what exhaust to fit to 200tdi engine, on a swb series chassis, i have looked through the parts list at paddocks and can't seem to see anything with a wide enough bore, last one i did i used a v8 system wich worked ok, but that was a lwb, do they sell a v8 system for a swb?
     
  2. Blackburn

    Blackburn Well-Known Member

    Joined:
    Feb 21, 2013
    Posts:
    3,064
    Likes Received:
    605
    Location:
    Tyneside
    Look up Steve Parker exhausts.
    Not cheap but only one I know who makes them
     
  3. divie

    divie Well-Known Member

    Joined:
    Jul 21, 2011
    Posts:
    1,113
    Likes Received:
    63
    If you look on Glencoynes web page he shows it using the old 2.25 diesel manifold, a quick fix whilst you sort out a big bore system but it should run well enough.
     
  4. peter8315

    peter8315 Active Member

    Joined:
    Dec 16, 2010
    Posts:
    724
    Likes Received:
    20
    Location:
    Ilkeston, derbyshire
    thanks, i did look at glencoynes page its very interesting, and i used a lot of that info when i did my first conversion, i wanted to fit the exaust system with the body off its easier and its done then, ill get on to paddocks tomorrow to see if they do a v8 system for swb, i can mix and match the maifold to centre piece, Steve parker do one but as stated by Blackburn sooo expensive,
     
  5. NiteMare

    NiteMare New Member

    Joined:
    Feb 2, 2009
    Posts:
    836
    Likes Received:
    1
    Location:
    Birmingham
    if you can weld run round your local tyre fitters and backstreet garages ask to see what they've got in the bins and scrounge oddments to make your own, i've built 2 for the 200tdi so far and one for a prima conversion

    none of them cost me anything but time
     
  6. b20wnx

    b20wnx Well-Known Member

    Joined:
    Jan 3, 2011
    Posts:
    1,077
    Likes Received:
    0
    Location:
    wakefield west yorkshire
    I when first purchased had the exhaust up through the bonnet (hated it), did lots of looking around and ended up having one made to fit (think they used 300tdi exhaust) and it doesn't have silencer. Cost me over £200 quid. With iron sight I would have paid extra £100 ish for a stainless steel one. There a place in Leeds and Doncaster do them. Hope this helps
     
  7. boguing

    boguing Well-Known Member Full Member

    Joined:
    Mar 18, 2008
    Posts:
    6,089
    Likes Received:
    4,352
    Location:
    A bit sarf of Dorking
    I bought a Steve Parker stainless system for my SIII with Def 200tdi. Beautifully made and worth the extra, since it was to last a long time.

    However. It didn't fit. Parkers tried to help out but after toing and froing with photographs and theories, I gave up and cut a foot out under the crossmember. That was replaced with 18" of PolyLock.

    Metal Hoses and Assemblies

    And clamped with these.

    http://flexiducting.co.uk/doc/Mikalor_W2.pdf

    Which are incredible. You could crush steel rods with them!

    PolyLock is stainless, but even if it doesn't last as long as the system, it's pretty cheap.
     
  8. owl

    owl Well-Known Member

    Joined:
    Jun 30, 2010
    Posts:
    1,807
    Likes Received:
    71
    Location:
    Breaston Derbyshire
  9. peter8315

    peter8315 Active Member

    Joined:
    Dec 16, 2010
    Posts:
    724
    Likes Received:
    20
    Location:
    Ilkeston, derbyshire
    yes have done the scrounging bits of exhaust at ats tyre fitters in fact went there yesterday and they got nought, so bit the bullet and ordered a full system from paddocks, for a defender 110 2.5 turbo, i am hoping this should be near as damn it to the series, but i dont mind cutting and welding, was cheap enough about fifty quid.
    thanks owl that place is good to know for future
     
  10. welshlandy

    welshlandy Active Member

    Joined:
    Apr 13, 2008
    Posts:
    104
    Likes Received:
    5
    Location:
    swansea-ish
    I'm hoping that the full disco exhaust will be all I need to fab something up. But I'm very interested in your idea of the 110 system
     
  11. Dr_evil

    Dr_evil Banned

    Joined:
    Feb 7, 2011
    Posts:
    29,535
    Likes Received:
    25
    Location:
    Perched on the naughty step
    If you were closer I'd have offered you the V8 system off my series one.......plenty of bends on that which could have been used
     
  12. peter8315

    peter8315 Active Member

    Joined:
    Dec 16, 2010
    Posts:
    724
    Likes Received:
    20
    Location:
    Ilkeston, derbyshire
    yes it works!, i got the rear pipe with silencer the centre section and the front pipe, for a 90 defender 2.5 t/diesel and it fits a teat, only used the 90% bend of the front pipe witch is welded onto the origanal disco downpipe, wish i could share it with photos but am useless with computors
     
  13. Blackburn

    Blackburn Well-Known Member

    Joined:
    Feb 21, 2013
    Posts:
    3,064
    Likes Received:
    605
    Location:
    Tyneside
    To clarify can you post the part numbers interested in copying this.
     
  14. peter8315

    peter8315 Active Member

    Joined:
    Dec 16, 2010
    Posts:
    724
    Likes Received:
    20
    Location:
    Ilkeston, derbyshire
    yes got the from paddocks front pipe ntc4426, £14.44, intermediate pipe ntc4221 £10.50, rear pipe and silencer ntc1802 £23.36, any order over £50.00 not inc vat is free
     
  15. peter8315

    peter8315 Active Member

    Joined:
    Dec 16, 2010
    Posts:
    724
    Likes Received:
    20
    Location:
    Ilkeston, derbyshire
    free delivery that is
     
  16. Blackburn

    Blackburn Well-Known Member

    Joined:
    Feb 21, 2013
    Posts:
    3,064
    Likes Received:
    605
    Location:
    Tyneside
    Thanks Peter
     
  17. Jumping Jack Flash

    Jumping Jack Flash New Member

    Joined:
    Sep 6, 2021
    Posts:
    4
    Likes Received:
    0
    Location:
    Derby
    I want an exhaust for my series 3 swb with a 200tdi in it, would this fit mine. Thanks Pete
     
  18. Jumping Jack Flash

    Jumping Jack Flash New Member

    Joined:
    Sep 6, 2021
    Posts:
    4
    Likes Received:
    0
    Location:
    Derby
     
  19. Jumping Jack Flash

    Jumping Jack Flash New Member

    Joined:
    Sep 6, 2021
    Posts:
    4
    Likes Received:
    0
    Location:
    Derby
    Would this work on mine I have a series 3 swb with a 200tdi in. Thanks Pete
     
  20. cornish rattler

    cornish rattler Well-Known Member

    Joined:
    Aug 15, 2010
    Posts:
    5,939
    Likes Received:
    823
    Location:
    Manc chester
    Had 2 of these now one a 200tdi to series and one a 300tdi to series, can't fault them :)
     
< Previous Thread | Next Thread >