David6214
New Member
- Posts
- 198
- Location
- Hampshire / West Sussex
What do you think of this roll bar
- Thread starter David6214
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Sirus
Your all Banned except me
- Posts
- 22,196
- Location
- The Country of Black
Issa lovelly colour
David6214
New Member
- Posts
- 198
- Location
- Hampshire / West Sussex
It doesn't have a great future...I reckon the landy will look much better without it...I also think the landy will look nice on ebay but that is another matter!
doobie
Active Member
- Posts
- 807
- Location
- North East of Scotland
freekin sweet!! i'v not long started welding and was thinking my practice welds were terrible but they look ace compaired to them! 
David6214
New Member
- Posts
- 198
- Location
- Hampshire / West Sussex
Thankfully its not my own work!
I got someone to give me a lesson for the cost of a few pints when I started
I got someone to give me a lesson for the cost of a few pints when I started
yella
New Member
- Posts
- 15,991
Thankfully its not my own work!
I got someone to give me a lesson for the cost of a few pints when I started
looks like the bloke that made that had a few pints first
David6214
New Member
- Posts
- 198
- Location
- Hampshire / West Sussex
indeed! I reckon it would do more harm than good if it was ever required!!
Once I have taken out the dodgy wiring, replaced it with a decent loom, tidied up where I removed the bullbar (didn't go with the military style bumperettes), and got it started it should be a viable landy!
Once I have taken out the dodgy wiring, replaced it with a decent loom, tidied up where I removed the bullbar (didn't go with the military style bumperettes), and got it started it should be a viable landy!
Snadger
New Member
- Posts
- 35
- Location
- Newcastle-Upon-Tyne
If it's just for posing...................cover it with pipe lagging!
iannotts
New Member
- Posts
- 4,401
- Location
- East midlands,
i wouldn't trust my life on it
That is ****,
Fully weld it at least.
When did the pigeon's fly over by the way?
That is ****,
Fully weld it at least.
When did the pigeon's fly over by the way?
Snadger
New Member
- Posts
- 35
- Location
- Newcastle-Upon-Tyne
You could get someone to weld it up properly, but........................ the diameter of the pipe, the type of steel, the corrosion on the steel and the positioning of the mounts would all combine to make it pretty ineffectual!
clivees
Well-Known Member
- Posts
- 2,070
Well i think that its very usefull as it tells me a lot about the guy who did it.
Ie if he thorght that was ok what else has he bodged?
I would CHECK EVERYTHING and TRUST NOTHING.
Ie if he thorght that was ok what else has he bodged?
I would CHECK EVERYTHING and TRUST NOTHING.
iannotts
New Member
- Posts
- 4,401
- Location
- East midlands,
You could get someone to weld it up properly, but........................ the diameter of the pipe, the type of steel, the corrosion on the steel and the positioning of the mounts would all combine to make it pretty ineffectual!
Very true, the tub is only made of ally, nearly 2 tons of motor landing on it, it will just crush and you with it
David6214
New Member
- Posts
- 198
- Location
- Hampshire / West Sussex
Now available in kit form.....it didn't take much!
iannotts
New Member
- Posts
- 4,401
- Location
- East midlands,
Best thing for it
slob
Well-Known Member
- Posts
- 22,488
- Location
- Harrogate or London
heres a thought!!! maybe who ever did it was just gonna use it as a template fer a real one.. am sure most folk have just fung together somin as a guide fer the real thing
iannotts
New Member
- Posts
- 4,401
- Location
- East midlands,
Real un's go down onto the chassis
Well the one on my lawn does anyway
Well the one on my lawn does anyway
slob
Well-Known Member
- Posts
- 22,488
- Location
- Harrogate or London
yer not wrong, ah was just trying to think of a good reason why..Real un's go down onto the chassis
Well the one on my lawn does anyway
