What are people using to protect bare metal after doing repairs?

I need to order 2 outriggers and tie braces and after the work I'm looking for something to coat the metal along with the rest of the front half of the chassis.

What rustproofing protection would you recommend for rusty and clean metal?

I've heard good things about some protection which work best with metal that isn't completely clean of rust as it encapsulates it and gives the paint something to grip too.

Open to suggestions. I'd like to order a couple litres for other jobs I have planned.

What do you think of red oxide?
https://www.ebay.co.uk/itm/172466872815

I use a rust converter then red oxide but leave a couple of days between treatments to harden fully...

Try this:
https://www.ebay.co.uk/itm/161219892658
They also do a number of other industrial paints, see their website:
https://www.arc-rite.co.uk/

Shippers said:

I use a rust converter then red oxide but leave a couple of days between treatments to harden fully...

Click to expand...

@Shippers what rust converter are you using? I've got lots of phosphorus acid which seems to work great. I just wouldn't want that to react to the red oxide or zinc primer.

• Phosphoric Acid

wireman said:

Try this:
https://www.ebay.co.uk/itm/161219892658
They also do a number of other industrial paints, see their website:
https://www.arc-rite.co.uk/

Click to expand...

@wireman that looks like a really good price. The stuff I've been using for the tub and back half of the chassis costs that much for 1 litre which is why I wanted to find an alternative.

On chassis type stuff, I use the Bilt Hamber Dynax UB wax - sprayed on to de-greased metal - no paint involved - if the metal was rusty, I use Fertan to convert the rust, and then the Dynax .....

https://www.bilthamber.com/corrosion-protection-and-rust-treatments/dynax-ub

https://www.fertan.co.uk/

sirwin said:

@Shippers what rust converter are you using? I've got lots of phosphorus acid which seems to work great. I just wouldn't want that to react to the red oxide or zinc primer.

• Phosphoric Acid

Click to expand...

I'm in Portugal...it's a milky white product you paint on that starts to go green and sticky then changes to shiney black but have found if it hasnt hardend more than the time they say red oxide spray I use may react to it...most guys on youtube in UK and America use the same converter as you dont have to wash it off...I use a gel as well that includes acid to clean rust if I want to weld that surface...