stamford
New Member
- Posts
- 57
- Location
- Waterlooville, Hampshire
Wanted-info on mounting brackets for nudge bar Disco 2
- Thread starter stamford
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Mr Fleg
New Member
- Posts
- 69
- Location
- middlesbrough
that looks like a towing eye bracket, they hold the crush cans in then the bumper bolts to the side of the crush can!! the towing eye is made from 3 maybe 4mm steel if that helps.
stamford
New Member
- Posts
- 57
- Location
- Waterlooville, Hampshire
The 2 off towing hooks are removed and these are bolted in its place, they look similar. The usual LR thing, remove lots of bits, bin them and drill more holes!
Urban Panzer
New Member
- Posts
- 610
- Location
- Beds, UK
You can get them here
Rover Connection-Land Discovery Brush Bars obviously you'll have to import them tho.
Rover Connection-Land Discovery Brush Bars obviously you'll have to import them tho.
stamford
New Member
- Posts
- 57
- Location
- Waterlooville, Hampshire
Yea, already clocked them, kept that as a last ditch thing, cheers.
I'll probably take the bumper off and measure up for making some. Having looked earlier it looks like a bar has been fitted before as the tow eye bracket is not there, hence the brackets had gone, also a slot has been cut in the lower valance.
Similar threads
