viscous fan
- Thread starter gR@HaM
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
666 george
Well-Known Member
- Posts
- 1,535
- Location
- Essex
Is it a left hand thread ?
666 george
Well-Known Member
- Posts
- 1,535
- Location
- Essex
Turn the engine over and see which way it turns !
Will it come off if it's a right hand thread ?
Will it come off if it's a right hand thread ?
Trewey
Cockernee, Pasty munchin bastid.
- Posts
- 20,091
- Location
- Kernow - Near England
wot engine?
Trewey
Cockernee, Pasty munchin bastid.
- Posts
- 20,091
- Location
- Kernow - Near England
it's a left hand thread, so clockwise to undo.
try to hold the shaft with something and give the spanner a sharp tap with a hammer. that usually works.
don't bother putting it back on, it's not needed.
try to hold the shaft with something and give the spanner a sharp tap with a hammer. that usually works.
don't bother putting it back on, it's not needed.
gemsdad
NOT BOTHERED.
- Posts
- 67,823
- Location
- halfway between here and there.
i used a stillson wrench on mine but that was on a p38 diesel though,
Trewey
Cockernee, Pasty munchin bastid.
- Posts
- 20,091
- Location
- Kernow - Near England
aye, a big pair of stillsons is almost as useful as a big ammer
gemsdad
NOT BOTHERED.
- Posts
- 67,823
- Location
- halfway between here and there.
aye and a small pair of stillsons is evem more usefullerer.
gemsdad
NOT BOTHERED.
- Posts
- 67,823
- Location
- halfway between here and there.
ere trewey,hows that business idea coming along,i think it was for building and general maintenance work.
Trewey
Cockernee, Pasty munchin bastid.
- Posts
- 20,091
- Location
- Kernow - Near England
official launch is 11th July at the local agricultural show.
having a fookin nightmare with BT though, tryin to get a phone for the biz.
gemsdad
NOT BOTHERED.
- Posts
- 67,823
- Location
- halfway between here and there.
thats great trewey,i really hope it all works out well for you,dont forget the piccys of the launch,and go and fire a rocket up BTs arse,the squeekyest wheel gets the most oil,so keep at the sods.
gemsdad
NOT BOTHERED.
- Posts
- 67,823
- Location
- halfway between here and there.
gemsdad
NOT BOTHERED.
- Posts
- 67,823
- Location
- halfway between here and there.
just take it of and leave it of,i have put a new one on mine but it is over cooling the engine,so its coming off asap.
gemsdad
NOT BOTHERED.
- Posts
- 67,823
- Location
- halfway between here and there.
Trewey
Cockernee, Pasty munchin bastid.
- Posts
- 20,091
- Location
- Kernow - Near England
unless yer plannin on towing heavy trailers up long steep hills in the sahara, the fan is not required on 200 or 300 injuns.
not had one on mine fer 2 years - never goes above 5/8 on the gauge, even when left ticking over for an hour in 30deg heat on Monday (whilst winching Pikey's 90 back onto its wheels).
not had one on mine fer 2 years - never goes above 5/8 on the gauge, even when left ticking over for an hour in 30deg heat on Monday (whilst winching Pikey's 90 back onto its wheels).
halo
Active Member
- Posts
- 660
- Location
- derbyshire
not got one on my 300tdi either and it runs better now it can get to proper working temp.
where abouts in posh cheshire are you.
About 5miles from chester, but wouldn't go as far to say posh also 5 miles from runcorn!
