VIN number and Chassis number; same?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Ninja Goat

Ninja Goat

Member
Posts
50
Location
Melton Mowbray
On a Series 3 1980. Would the VIN number and Chassis number be the same?
I.E the last digits.
The "glencoyne" web site is showing pictures of VIN plates and calling them Chassis numbers, is this correct?
I ask this beacuse my S3 does not have a chassis number stamped on it. It's not been removed it just not there.
Regards, Paul
 
Ninja Goat said:
On a Series 3 1980. Would the VIN number and Chassis number be the same?
I.E the last digits.
The "glencoyne" web site is showing pictures of VIN plates and calling them Chassis numbers, is this correct?
I ask this beacuse my S3 does not have a chassis number stamped on it. It's not been removed it just not there.
Regards, Paul
Click to expand...
From memory, early Series just had a production number stamped on the metal plate inside the cab. I don't think VIN numbers were around at that time, manufacturers just did what they wanted.
Later on, chassis numbers started being stamped on the front chassis dumb iron.

But they may be so rusty now they are almost impossible to read, or even find, or coated with underseal or other gook, likewise.

And many vehicles have had front dumb irons replaced, so there may be none at all, except on the plate inside the cab.
 
My Series 3 had the chassis number stamped on the chassis and the exact same number engraved into the vehicle ID plate at the radiator
 
Turboman said:
From memory, early Series just had a production number stamped on the metal plate inside the cab. I don't think VIN numbers were around at that time, manufacturers just did what they wanted.
Later on, chassis numbers started being stamped on the front chassis dumb iron.

But they may be so rusty now they are almost impossible to read, or even find, or coated with underseal or other gook, likewise.

And many vehicles have had front dumb irons replaced, so there may be none at all, except on the plate inside the cab.
Click to expand...

The 59 S2 i'm working on has chassis number stamped on to dumbiron and on plate inside bulkhead..
 
Shippers said:
The 59 S2 i'm working on has chassis number stamped on to dumbiron and on plate inside bulkhead..
Click to expand...
Fair enough. I am only going by what I remember seeing over the years.

Most Series I see now are re-chassis, some have no numbers, on some, the owner has stamped the new chassis themselves with the old number.

Edit. Also from memory, Series are quite different in small details even within vehicles built in the same year.

I always get the impression that what happened on the day was in part down to what parts were in stock, and what the chap who was doing different jobs on that day felt like.

If they were in a hurry to get home on a Friday, they may not have bothered to stamp the chassis! :D
 
Vin and chassis one and the same thing, unless it has some weird history.

My 59 still has its original chassis number, when the dumb iron rotted out, I rebuilt it so I could keep the chassis number in its rightful place.
 
I am one of the folk who kept the original stamped dumb iron and stamped the original number back onto the new chassis dumbiron
 
Ninja Goat said:
Hi, are they the same numbers?
Click to expand...
Yes, they are the same.

Is your VIN on the plate one of those nine figure numbers starting with 9 and ending in a letter, presumably 'C'? I'm not sure how the numbers were applied when Land Rover changed the layout of all the VINs but I would have thought both the plate and the chassis would still be the same, that's the point of a VIN.
 
Last edited:
6pot said:
Yes, they are the same.[GALLERY=][/GALLERY]

Is your VIN on the plate one of those nine figure numbers starting with 9 and ending in a letter, presumably 'C'? I'm not sure how the numbers were applied when Land Rover changed the layout of all the VINs but I would have thought both the plate and the chassis would still be the same, that's the point of a VIN.
Click to expand...
 
6pot said:
Yes, they are the same.

Is your VIN on the plate one of those nine figure numbers starting with 9 and ending in a letter, presumably 'C'? I'm not sure how the numbers were applied when Land Rover changed the layout of all the VINs but I would have thought both the plate and the chassis would still be the same, that's the point of a VIN.
Click to expand...
VIN No.JPG
 
Ninja Goat said:
View attachment 247003
Click to expand...
OK so that's one of the amended style VINs, I wasn't sure whether or not they came in as early as 1980. I haven't got any experience of those but I would assume that the VIN stamped on the chassis should be the same. That is the case on 'normal' cars, certainly all the ones I've had as far as I know, although I never took much notice.
 
6pot said:
OK so that's one of the amended style VINs, I wasn't sure whether or not they came in as early as 1980. I haven't got any experience of those but I would assume that the VIN stamped on the chassis should be the same. That is the case on 'normal' cars, certainly all the ones I've had as far as I know, although I never took much notice.
Click to expand...
Ok thanks.
 
You must log in or register to reply here.

Similar threads

A
Series 3 Chassis Number
Replies
5
Views
838
Wildefalcon
W
jimllshiftit
Galvanised Chassis VIN number questions.
Replies
8
Views
1K
miktdish
miktdish
tyregeezer
Tdv6 ford pump logos and part number ground off
Replies
18
Views
1K
gstuart
gstuart
M
Pump to the steering box pipe
Replies
4
Views
926
mma59
M
dag019
Fitting a Husky Winch
Replies
8
Views
771
dag019
dag019
Back
Top