Vehicle ramp's.
- Thread starter KB22
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Datatek
Well-Known Member
- Posts
- 44,095
- Location
- Near Poitiers SW France
Look at the load rating.
Datatek:- 7 ton per pair, tested to 12 ton per pair. Phenomenal weight for plastic/polypropylene?
Datatek
Well-Known Member
- Posts
- 44,095
- Location
- Near Poitiers SW France
Plastic?
Personally I wouldn't touch them. Plastic degrades too quickly for my liking.I agree about the degradation, I think it is accelerated by leaving item's in the sun! Apart from that I can't see anything else on offer with these spec's, delivered to my door for fifty sod's!Plastic?
frog hopper
Well-Known Member
- Posts
- 4,710
- Location
- france
Have a search for Hippo Ramps. I made a set and they are useful in that once the car is up on the platform you can move the angled part to make access easier.
Found them for you.
https://www.landyzone.co.uk/land-rover/hipporamps-how-to-guide.257760/
Found them for you.
https://www.landyzone.co.uk/land-rover/hipporamps-how-to-guide.257760/
Hippo
Lord Hippo
- Posts
- 52,116
frog hopper
Well-Known Member
- Posts
- 4,710
- Location
- france
+1
I'll have to post a photo of mine, of course being a joiner/cabinet maker they are a lot rougher than yours
I'll have to post a photo of mine, of course being a joiner/cabinet maker they are a lot rougher than yours
- Posts
- 31,669
- Location
- North Shropshire
I have a pair of home made ramps, if i remember I'll take a pic. Around 12" lift
Hippo
Lord Hippo
- Posts
- 52,116
HippoRamps (TM) are real. We ain't joking. Follow the link above.
Many years ago we had a set of metal ramps. The type where yer had ter take a run up ter get the wheels over the ladder diagonal bit. Rust got to them and they were too much of a risk ter use. So eye made some out of wood.
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
You forgot to add that they are a good source of kindling if you get fed up with the ribbing for owning a Gaylander.
- Posts
- 58,170
- Location
- Preston Lancs.
You forgot to add that they are a good source of kindling if you get fed up with the ribbing for owning a Gaylander.
Yep soak in paraffin and light for a satisfactory conclusion.
EntropyUK
Well-Known Member
- Posts
- 466
- Location
- Hemel Hempsted
I use a set of camper van leveling ramps. Manged to get them off Flebay for a couple of quid as I needed to get the MX5 high enough to get the jack underneath. Works fine for the Landy and if I need anything higher I use a jack and axle stands.
Hippo
Lord Hippo
- Posts
- 52,116
My freelander is more reliable and cheaper ter run than your big freelanderYou forgot to add that they are a good source of kindling if you get fed up with the ribbing for owning a Gaylander.
I started this thread stating that I have an RRC. It is a 1994 " VOGUE SE 300Tdi AUTO on AIR". It is not the downstair's maid's shopping trolley ie.(freelander/evoque, etc.). Such cheek! For the " RANGE ROVER " members I have ordered the KATSU ramp's , mainly because they are lightweight. Thank's all regarding timber ramp's.My freelander is more reliable and cheaper ter run than your big freelander
Western Slope Rover
Well-Known Member
- Posts
- 3,794
- Location
- On a mesa
Are you the upstairs maid?
No . I'm the one in the four poster giving the order's. Send up the milk maid . Can you comprehend?
