Valve block rebuild tip.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
rewmer

rewmer

Well-Known Member
Posts
2,082
Location
Clacton, Essex, UK
Just a quick tip for anyone doing a rebuild on their valve blocks. When you have re-assembled everything remember to plug the valves into the driver pack. It will work a lot better.:doh::doh::doh::doh::doh::doh::doh::doh:
 
rewmer said:
Just a quick tip for anyone doing a rebuild on their valve blocks. When you have re-assembled everything remember to plug the valves into the driver pack. It will work a lot better.:doh::doh::doh::doh::doh::doh::doh::doh:
Click to expand...

Dumkoff. Cooler three veeks.:):):)
 
rewmer said:
I was distracted when my neighboor wished me "Goot Luck" :rolleyes:
Click to expand...

Do these well wishers not realise that they should not talk to any man working on his Range Rover. The slightest question nod or wink can lead to temporary amnesia or even total memory loss for seveal hours. It was very remiss of your neighbour and i hope he will be suitably chastised next time you see him. Only good thing is you have someone to blame. Everyone on here fully understands that uniterrupted you would NEVER have made that mistake.
 
You must log in or register to reply here.

Similar threads

B
P38A 1996 4.6 Auto HSE. driver side bags not inflating after valve block rebuild.
Replies
17
Views
2K
nigelbb
N
Mph007365
Eas valve block rebuild
Replies
6
Views
2K
Datatek
Datatek
Montyjohn
P38A A couple of queries about rebuild EAS valve block
Replies
9
Views
2K
Grrrrrr
Grrrrrr
pwood999
P38A EAS Random Extended Mode Selection
Replies
16
Views
2K
Datatek
Datatek
Francesco M.
P38A The arrival of a P38
4 5 6
Replies
102
Views
9K
Rubberknees
Rubberknees
Back
Top