R
Richard
Guest
Just thought I would check my air flow meter as it only does about 10mpg.
According to the RPi site it says: Air Mass meter (cat). Switch on ignition
peel back rubber boot on airflow Blue with Brown=minus. Red with Black
trace=positive.......
The colours on my meter are Blue/Red, Brown/Orange, Blue/Green and
Red/Black. (RPi page http://www.v8engines.com/carbs-2.htm#setting-up ).
Does anyone know which colours I should check?
Its a 1995 3.9 Discovery
Thanks
Richard
According to the RPi site it says: Air Mass meter (cat). Switch on ignition
peel back rubber boot on airflow Blue with Brown=minus. Red with Black
trace=positive.......
The colours on my meter are Blue/Red, Brown/Orange, Blue/Green and
Red/Black. (RPi page http://www.v8engines.com/carbs-2.htm#setting-up ).
Does anyone know which colours I should check?
Its a 1995 3.9 Discovery
Thanks
Richard