Freelander 1 Using car with front passenger seat removed.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Kalahari_Pete

Member
Posts
39
Location
Evesham
Hi, need to remove front passenger seat for a couple of weeks.
I am unsure what to do about the seat belt pretensioner.
Should I remove it from the car altogether or should I connect the electric plug and leave it in the passenger footwell?
I'd prefer to remove from the car but unsure what problems I will cause myself with the electrical systems.
Your advice greatly appreciated. Cheers.
 
Remove the bolts securing the seat. Disconnect any cable connecters that stop you removing the seat. Thats what I did. It was ok.
 
Remove the bolts securing the seat. Disconnect any cable connecters that stop you removing the seat. Thats what I did. It was ok.
Thanks for the reply. I read elsewhere that you have to disconnect battery completely and wait 30 mins before removing connection to seat belt pre tensioner.
Did you do that? I don't want it exploding on me!
 
Would confirm my suspicion that there is only a 12v sent to the airbag / belt tensioner to detonate it, meaning we needn't be as scared of these explosively activated safety devices such as air bags and belt pre-tensioners, which would take some of the pressure off you refitting the seat in a week or so's time as you'd know you weren't likely to have anything blow up in your face.
 
Would confirm my suspicion that there is only a 12v sent to the airbag / belt tensioner to detonate it, meaning we needn't be as scared of these explosively activated safety devices such as air bags and belt pre-tensioners, which would take some of the pressure off you refitting the seat in a week or so's time as you'd know you weren't likely to have anything blow up in your face.
I've left the front passenger seat in as I had enough room with just the rear split seats out.
I may have to remove it in the future if I need the extra space lengthwise.
 
Back
Top