umm, what engine is this?

ok, it sounds like a bit of a silly question, but ive not done any work on landy before so starting with the basics.

i'm thinking its a standard 2.0 deisel, but ive got a feeling this series 2 has had a lot of work in the past.

Cheers, T

am not sure myself as I've never seen a series engine shock!

But just for reference they were fitted with a 2.25 litre cylinder capacity motor.

looking very sherpa van/ldv ish that is

Even tho I have to agree with a Brummie Looks like Oil says Sherpa/LDV

DISCOV8 said:

Even tho I have to agree with a Brummie

Click to expand...

ere read me sig

wont old it against u m8

bastid

dont put ursef down m8 no1s perfikt

bint a brummy so i dunt care so go an fook yerselfs ya saft c,unt

im shocked at said vulgarity n 2 say i agreed wiff u originly

TheVengefulElephant said:

am not sure myself as I've never seen a series engine shock!

But just for reference they were fitted with a 2.25 litre cylinder capacity motor.

Click to expand...

If it's really a Series II (as distinct from a IIA) then Trev's right, the original diesel was a 2 litre.

I agree with the others, 2.5, probably from a Sherpa.

i would say it was a 2.5 diesel ldv engine you can tell because the injector pump is mounted lower than on the land rover fitted engine also the air cleaner is different yours is a ldv sherpa engine

TheVengefulElephant said:

am not sure myself as I've never seen a series engine shock!

But just for reference they were fitted with a 2.25 litre cylinder capacity motor.

Click to expand...

Not in 1958 the Series two I think was fitted with a slightly smaller engine, enlarged later to the 2.25.

Andrew.

Well i finks its a diesel an it needs its battery chargin. But who am i to pass coment.

cheers for that, good job i didnt get any parts for it before i asked!