Ultrasonic sensor module P38 connection.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

HAPA

New Member
Posts
1
Does anyone know how to connect ultrasonic sensor module? I have three wires yellow, black, yellow&red ( Vcc GND and probably signal) and four pins in sensor module socket. Which wire goes to which pin?
I will appreciate the answer to my question.
 
Red/Yellow pin-1, Yellow/Pink pin-3, Black pin-2. Pin-4 not used. On plug CO359. Or C359 early models. Also introducing yourself is a good idea, info on your model is also a good idea to aid answers.
 
Last edited:
Back
Top