Tyres sticking out

Hi guys
I have a D2 2"lift and 285 75 16 discovery stt pros tryes with offset modulers now the problem is they seam to stick out more on the drivers side then the passenger side? I have asked about at work lads say check your watts linkage done nowt that a can see there. Any ideas gents?

Day Shar Vue... We had a similar question the other day and it turned out that the watts linkage had been reassembled incorrectly and entire body had moved to one side making the tyres stick out more than they should.
Would be one hell of a coincidence if you have the same issue.

Cheers for a speedy reply dude. Stupid question but any idea how I would go about checking that?

a picture speaks a thousand words

Check out the other thread that had the problem.
https://www.landyzone.co.uk/land-rover/rear-axle-sticking-out.346126/

@Discomex don't forget to post back when you find the issue, or if you need any help from the experts on the forum
(I'm not one of them by the way!)

Just seen that watts linkage mine looks correct bottom passenger side and top drivers side.

Time for pics me thinks

As in referenced thread pics says it all and helps the eggsquirts.

J

Hi mate
I've just had the same problem turns out the watt lineage was put together the wrong way yellow ones the correct way .old rusty one the wrong way..

A think mine looks normal

And pictures of the rear springs

Take some piccies down the sides of the car so we can see how much they're sticking out.