dwalsh1
Active Member
- Posts
- 309
- Location
- Harrow, Middlesex.
Anyone know the correct pressure for a General Grabber AT3 235/55/18 on a FL1. The guy at 4x4 tyres said 34 psi. Would this be about right?................Thanks in advance
Tyre pressure?
- Thread starter dwalsh1
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Nodge68
Well-Known Member
- Posts
- 32,504
- Location
- Near Newquay
When I fit that size of tyre, I'm going to try the factory setting of 30 Psi and go from there. I run my current 225/60/17 at 31 Psi as it was wearing the outsides faster then the centre at 30 Psi. I suspect the 235/55/18 will need something like 32 to 34 Psi to avoid a similar problem. However tyre pressures are very individual for each type and size of tyre.
