Turning over but no spark

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Scott C

New Member
Posts
1
I have a Discovery 1 1996 and it turns over and has no spark. (Not Switching) I have had an AA mechanic has said the following:-
12+5 volt feeds at mass air flow meter. No Spark and No injectors being switched. 21 Volt feeds at coil and Injectors. Suspect dist/amp fault.

I have read that the Amp problem could be the ignition module. Is this possible?

Thanks
Scott
 
unless coil has 12v feed to + side you wont have spark or running ecu,remove wires and check ie feed wire has 12 v when not connected to coil then has when is etc remove amp wires and check difference
 
Back
Top