turbo problems

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

steve f

New Member
Posts
7
Hi all

I've only just joined your exclusive club, and i already have questions????

my disco has been short of power lately,i put this down to a hole in the exhaust but now i've fitted a new one the problem is the same.
I've carried out a turbo boost pressur check as discribed in the Haynes manual ( b***ard book:mad: ) but not sure i conected it to the right hose as the books not to clear(believe it or not):rolleyes: . and the gauge is not even moving.any help would be greatfully received.
 
i have two turbo's in me porn draw doing nothing ....... you aint havin umm or owt i just wanted to rub salt in.... :rolleyes:


oh and welcome to the looney bin .... make yerself at home .... :D
 
I keep porn in my porn draw not turbos, i knew i was doing somthing wrong.

any help on the turbo front???
 
not an expert on turbo's , can ya tell ?? , the only thing i can suggest is to check all the hoses for splits and cracks ... and check yer intercooler pipes and hoses aswell .....
 
I keep porn in my porn draw not turbos, i knew i was doing somthing wrong.

any help on the turbo front???
If yer keep Tuirbos (or anything else landroverry and mechanical) in yer porn drawer, it exponentially reduces the chances of being found out by yer doris!!:D
 
check there are no small holes in full line could be drawing air
When mine was drawing air in it was on the lines from the sedimenter.
It'd tickover fine and run alright at 30mph but put ya foot down and it'd bog down, stall and die.

Guess the fuel was turning to foam.
 
OK EVEN ATIT RUNS 70MPH BUT NO TURBO KICKS IN YET THE TURBOS SPINING FINE (I CHECKED IT WITH A MIRROR AND TORCH) THERE'S JUST NO get up and go.
 
Back
Top