payydg
Well-Known Member
- Posts
- 3,907
- Location
- Aberdeenshire
Quick question - what size tube fits over the brake bleed nipple on a defender?
Tube to fit brake bleed nipple
- Thread starter payydg
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
RangeRoller dt
Well-Sprung Member
- Posts
- 14,410
- Location
- Trapped inside my head @ LZ asylum
Any old little thing id look in your shed/behind seats
I’ve used fish tank pipe and even cut bit off my diff breather in past. Secure it on with zip tie if it’s not smack on
I’ve used fish tank pipe and even cut bit off my diff breather in past. Secure it on with zip tie if it’s not smack on
RangeRoller dt
Well-Sprung Member
- Posts
- 14,410
- Location
- Trapped inside my head @ LZ asylum
Will make your windscreen oily when you put it back 
rob1miles
Well-Known Member
- Posts
- 3,565
- Location
- Slough and Bath
payydg
Well-Known Member
- Posts
- 3,907
- Location
- Aberdeenshire
Nice one guys think 4mm internal diameter pipe should do
- Posts
- 7,898
- Location
- East Midlands
I bought a selection of oddments off Ebay about seven years ago but I can't remember exactly what size they were. 3mm, 4mm 5mm, that sort of thing. Most of them are fairly flexible so, lubricated with a bit of brake fluid, they'll push over, especially if warmed up first.
https://www.ebay.co.uk/sch/i.html?_...lexible+tube.TRS0&_nkw=flexible+tube&_sacat=0
https://www.ebay.co.uk/sch/i.html?_...lexible+tube.TRS0&_nkw=flexible+tube&_sacat=0
flat
Well-Known Member
- Posts
- 9,075
- Location
- Far away from you!!
green oxygen bubble tube
payydg
Well-Known Member
- Posts
- 3,907
- Location
- Aberdeenshire
green oxygen bubble tube
Haha yeh good shout.
- Posts
- 23,050
- Location
- In the next Glen
Similar threads
Freelander 2 (LR2)
Clutch bleed nipple