Trailer hitch
- Thread starter natas
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
No idea what the standards are in the Bahamas, but in UK trailers use a standardised 50mm ball; or a 25mm pin. There's plenty of other connections (Rockinger 2", 80mm ball and cup, 6 classes of tractor drawbar, etc) but they're for other types of trailers than a LR might typically tow.
If your towing standards use 2" receiver hitch, then there will be loads of USA sites which offer a towbar and other fittings.
HTH
If your towing standards use 2" receiver hitch, then there will be loads of USA sites which offer a towbar and other fittings.
HTH
bustersbus
Well-Known Member
- Posts
- 13,755
- Location
- Near Dumfries, Scotland
Do ye mean ball / pin or jaw?
kieranbolton
New Member
- Posts
- 108
- Location
- Durham
im pritty sure your ready for anything there buddy
haha
haha
Do ye mean ball / pin or jaw?
Wow!
My old CJ5 had a trailer hitch that the balls just bolted to, seems like every other boat trailer has a different size??
Done some looking around, the confusion is probably because there's 4 different standard sizes of ball:
1 7/8"
50mm
2"
2 5/16"
This internet page may help: trailer hitches
1 7/8"
50mm
2"
2 5/16"
This internet page may help: trailer hitches
Similar threads
