towing fues

Karlos the jackal said:

OK people here a problem for you all my RR p38 2.5td 2000 came up with transmission neutral on the dash board yesterday I couldn't get any gears spoke to someone and said it comes up when fuse is in under the driver seat NO11 I checked fuse box and fues was in I've never had to tow it before so no reason to go in to fueses
so took fues out put back in and failt was cleared gear box back to normal
should fues be out or in on that model thanks for your help people

Click to expand...

tomcat59alan said:

Out.you should regularly shift from high to low so the shift motor gets used and doesn't seize.

Click to expand...

Karlos the jackal said:

I do that regularly it first time the box has come up with that so you think I should take the fues out

Click to expand...

tomcat59alan said:

Yes.

Click to expand...

Karlos the jackal said:

so take it out and just put it in if need to tow

Click to expand...

tomcat59alan said:

To be towed,not when towing.

Click to expand...

Karlos the jackal said:

yeah thats it I just wondered why it not putting box in to transfer neutral when the fuse has been in all this time

Click to expand...

tomcat59alan said:

You sure it was switching between high and low and not stuck in high?

Click to expand...

Karlos the jackal said:

it was switching fine last night it showed all the signs on the dash it was going from low to high range and it drive home fine changed gears fine as normal even moved it in low range then stopped and changed it back in to high and drove home

Click to expand...

tomcat59alan said:

Did you try driving it in low ratio to confirm it had switched? Can you now select neutral using a fuse?

Click to expand...

Karlos the jackal said:

yeah I drove it in low ratio then back in high to get home i left the fues in as it always been in

Click to expand...

tomcat59alan said:

​

It doesn't have to be there,only needs inserting if being towed.put it in one of the spare positions, one day you will need it.

Click to expand...