Throttle cable for V8 with Weber 500

I've just fitted a 500cfm Weber from RPI (badged up as an Edelbrock). I'm
not happy with the half-arsed throttle cable solution that RPI provide and
the original cable is a bit 'snug'.

Any suggestions for a longer cable (with a 'eye' fitting at the pedal end
and either a ball joint or clevis fitting at the carb end) or any
suggestions for UK suppliers of custom-made throttle cables?

Ta,
--
Smorgo (Steve Morgan)
Hello: '06 CBR1100XX, '86 V8 110
Goodbye: '01 VFR 800 FI,'01 NT650V
E-Mail address is spam-trapped. Use my first name at wormpurple dot com

used a company called "speedy cables but cant remember where they were tell
them what you want and it comes in the post well chuffed

Rich

--
To reply remove " spam "
"Steve Morgan" <[email protected]> wrote in message
news:[email protected]...
> I've just fitted a 500cfm Weber from RPI (badged up as an Edelbrock). I'm
> not happy with the half-arsed throttle cable solution that RPI provide and
> the original cable is a bit 'snug'.
>
> Any suggestions for a longer cable (with a 'eye' fitting at the pedal end
> and either a ball joint or clevis fitting at the carb end) or any
> suggestions for UK suppliers of custom-made throttle cables?
>
> Ta,
> --
> Smorgo (Steve Morgan)
> Hello: '06 CBR1100XX, '86 V8 110
> Goodbye: '01 VFR 800 FI,'01 NT650V
> E-Mail address is spam-trapped. Use my first name at wormpurple dot com
>
>