Thread not working

[kifferj]

Hi all, I need to replace my clutch on a defender 110 200tdi and saw the thread https://www.landyzone.co.uk/land-rover/defender-gearbox-removal-clutch-replacement-with-pics.136171/
But I can't get it to load properly with the pictures. Looks like it will be a really useful thread if I can. Does anyone have any suggestions please.

many thanks Chris

 

[raywin]

Looks like the picture were on a hosting site like photobox and they have either been removed, or the account closed.

 

[Turboman]

Hi all, I need to replace my clutch on a defender 110 200tdi and saw the thread https://www.landyzone.co.uk/land-rover/defender-gearbox-removal-clutch-replacement-with-pics.136171/
But I can't get it to load properly with the pictures. Looks like it will be a really useful thread if I can. Does anyone have any suggestions please.

many thanks Chris

Not much help, but the pics on that don't work for me either. Looks like they might have been deleted or something. Similar to what he said^^^^^.

 

[Marmaduke]

Hi all, I need to replace my clutch on a defender 110 200tdi and saw the thread https://www.landyzone.co.uk/land-rover/defender-gearbox-removal-clutch-replacement-with-pics.136171/
But I can't get it to load properly with the pictures. Looks like it will be a really useful thread if I can. Does anyone have any suggestions please.

many thanks Chris

Are you doing engine forwards or gearbox back? Personally I found moving the engine with the aid of a hoist easier

 

[Turboman]

Are you doing engine forwards or gearbox back? Personally I found moving the engine with the aid of a hoist easier

Yes, on a landrover, I would always remove the engine rather than the box, unless the rest of the trans needed attention.

 

[raywin]

Only done it once but engine out seems the best way, if you go that way take advantage and do some bits which are better accessed with the engine out I.e. Crank shaft seal.

 

[kifferj]

I hadn't thought about engine forward method. I had considered taking the whole engine and gear box out but you mean leave the gearbox in place?

 

[kifferj]

Is there a thread on this method, it would be nice to have a step by step.