this ok for me just startin wading? (kit)

brockus · Oct 2, 2010

LANDROVER 200tdi ultimate wading kit .FULL BREATHER KIT on eBay (end time 20-Oct-10 09:01:24 BST)

cheers ! suggestions

anthony

MrJC · Oct 2, 2010

I bought a similar kit off this guy for a 90 300tdi last year.... no problem, just follow the instructions. Some people will say you dont really need all of them?
I see you are fitting a snorkel.... dont trim the pipes too short at the top of the engine bay and you can run them up the side of the snorkel if it suits and fold them at the top pointing down. Go for black pipes if doing that... blue or red will do your head in on a black snorkel.

brockus · Oct 2, 2010

cheers for the reply i will order one i think then cheers

Anthony

Pikey · Oct 3, 2010

Oi fooker nowt wrong wiv Blue pipes they off set the snorkel lovely..

and don't fold the ends over just tuck em inside the snorkel top (especially wiv a Safari)

Big Stu 12 · Oct 3, 2010

I just got one of these for my 300tdi in Black, thought it was a good deal, have not had a chance to install it yet.

I did not recive any instruction with mine though. Have just send a message to the supplier, I await his responce.

hifly · Oct 3, 2010

I have just ordered sperate bits, if anyone has some instructions they can sent me i would be grateful

Cheers

Big Stu 12 · Oct 3, 2010

Big Stu 12 said:
I just got one of these for my 300tdi in Black, thought it was a good deal, have not had a chance to install it yet.

I did not recive any instruction with mine though. Have just send a message to the supplier, I await his responce.

I have had a reply back from the seller on ebay, his answer.........

"Dear zx12_stu,
Hi use this site will have all the info you need
cheers ....
LandyZone - Land Rover Forum
- a.e.b-4x4"

:doh::doh::doh:, I know how to iinstall the pipe work, but for someone who does not, not good.

Its good for him the guys and girls on here are so helpful.

Pikey · Oct 3, 2010

Big Stu 12 said:
I have had a reply back from the seller on ebay, his answer.........

"Dear zx12_stu,
Hi use this site will have all the info you need
cheers ....
LandyZone - Land Rover Forum
- a.e.b-4x4"

:doh::doh::doh:, I know how to iinstall the pipe work, but for someone who does not, not good.

Its good for him the guys and girls on here are so helpful.

Fook me we is Famous

brockus · Oct 3, 2010

well i have ordered one now guys so cheers for the replies...

so service car tomorrow then start on my home made snorkel... its goin to be like the southdwn one

Anthony

Big Stu 12 · Oct 4, 2010

brockus said:
well i have ordered one now guys so cheers for the replies...

so service car tomorrow then start on my home made snorkel... its goin to be like the southdwn one

Anthony

I brought a southdown one direct off them for £139.00 inc postage. if you dont mind a plain bit of pipe great value. and i found it easy to install.

brockus · Oct 5, 2010

big stu 12

upto now its cost me around £27 for my bits and its goin to look a bit like the southdown wen i get it done i will post it up !!

Pikey · Oct 5, 2010

ya can get the southdown wing connectors off Ebay for not a lot of money..

Big Stu 12 · Oct 11, 2010

Big Stu 12 said:
I have had a reply back from the seller on ebay, his answer.........

"Dear zx12_stu,
Hi use this site will have all the info you need
cheers ....
LandyZone - Land Rover Forum
- a.e.b-4x4"

:doh::doh::doh:, I know how to iinstall the pipe work, but for someone who does not, not good.

Its good for him the guys and girls on here are so helpful.

Started to fit me Wadding kit today, nearly done, just got the Gearbox and the transfere box to do , one thing tho, if you get a kit from the guy above, youll find a 6mm to 6mm stright joiner for the fuel breather on mine I have a 8mm Breather pipe..... woulf of thought this is standard as the rest of the disco was when i brought it.

Big Stu 12 · Oct 30, 2010

Big Stu 12 said:
I have had a reply back from the seller on ebay, his answer.........

"Dear zx12_stu,
Hi use this site will have all the info you need
cheers ....
LandyZone - Land Rover Forum
- a.e.b-4x4"

:doh::doh::doh:, I know how to iinstall the pipe work, but for someone who does not, not good.

Its good for him the guys and girls on here are so helpful.

I have just had a message from the Supplier after leaving a neutral feedback for him stating:

"No instructions, told to go to forum to find out, also connector for fuel wrong"

This is the message he sent to me

"Dear zx12_stu,

alrite mate thanks for the feedback ??
U SHOULD HAVE BOUGHT FOR WIZARD £65 (£40 FOR INSTRUCTIONS) but as long as ur happy mate .thanks

thanks alot from A.E.B-4X4"

then on the feedback list his responce is

Reply by a.e.b-4x4 (30-Oct-10 15:52):

we have sold.fitted 100s of these kits every union fits as it should idiot

All I can say is Make your own choice...........

hifly · Oct 30, 2010

well my disco has an 8mm fuel breather so i think he is the idiot.

amajors · Nov 2, 2011

hi all , so the question is to buy or not to buy. is there alternatives as it seems the seller is potentially blocked on ebay?
Also any suggestions for fitting a snorkel...
should i fork out or make one?

Tazz070299 · Nov 2, 2011

redhand said:
Fook me we is Famous

I think the forum should charge him supplying his paying customers with advice

. 15% of sales revenue?

Storm 71

will200 · Nov 2, 2011

if you need a 8mm-6mm push fit let me know... ive got a couple at work

this ok for me just startin wading? (kit)

brockus

Active Member

MrJC

Well-Known Member

brockus

Active Member

Pikey

Dummy Ejection Facilitator..

Big Stu 12

Well-Known Member

hifly

Active Member

Big Stu 12

Well-Known Member

Pikey

Dummy Ejection Facilitator..

brockus

Active Member

Big Stu 12

Well-Known Member

brockus

Active Member

Pikey

Dummy Ejection Facilitator..

Big Stu 12

Well-Known Member

Big Stu 12

Well-Known Member

hifly

Active Member

amajors

New Member

Tazz070299

New Member

will200

New Member

Similar threads