onelife
New Member
- Posts
- 491
- Location
- Southern England
Hi,
After a number of stupid questions on the Series forum, here's one on this one;
when replacing the plastic thermostat housing plug with a brass one (with O ring washer); firstly do you use any sealant, and how tight do you do it up.
I have looked on the forum, and haynes manual, not that helpful.
Thanks for any help, Mark
After a number of stupid questions on the Series forum, here's one on this one;
when replacing the plastic thermostat housing plug with a brass one (with O ring washer); firstly do you use any sealant, and how tight do you do it up.
I have looked on the forum, and haynes manual, not that helpful.
Thanks for any help, Mark