- Posts
- 49,045
- Location
- Over there
After much debate and sitting about thinking about it, I have decided to go for a similar paint colour as Aarron used on one of his previous re-builds.
I'm not going to have time to do a total re-build on the old girl - bits have been done over the course of the past couple of years and I'm fairly happy with the mechanical side of things -
The old girl is a G-reg 110 - the astute amongst you may notice it has 'Defender' on the front - this is because the front has been, at some stage, replaced.
You will also notice it has a 300TDi under the hood and the bulkhead is green...
Well, sort of dirty green....
So, the plan is to King / Double cab her, but as finding a roof is not as easy, I decide I wanted to at least do a basic tart-up and re-spray so its all one colour. If a DC roof pops up, I can simply add it into the mix.
Have done most of the welding required and now its time to sort out the bodywork and interior - as this is my work wagon, I can't strip it all down in one go sadly.
So, having seen the colour Aarron used on one of his many rebuilds, he told me it was Ford RS Blue - Cheers for that Chap! - Before making up my mind 100%, I decided to get a rattle can and try it out first - at £46/L +VAT I want to be sure!
So, off came the air flappy vents and they got a rub down from white - which evidently had been put on with a catapult - through the green and then sort of flat...
Coat of rattle can Etch Primer later:
Then decided that that may not be enough to decide, so had the front grill panel out, rubbed back and primed:
Then got bored and took the bonnet catch panel etc out as it looked grubby:
And cleaned up all the bits and gave them a coat of howsyourfather:
I will be putting a coat of the blue on the 3 panels tomorrow - I did a test spot on an old bit of tin and I do like the colour - as this is my 1st attempt at base colour and lacquer, I am not expecting it to be top bollock quality, which is why I chose 3 bits I can either re-do or hide!
In my mind, the interior is sorted... Grey lining and blue seats - I have found some seats I like here:
Sure someone will tell me I'm mad....
Will try and keep posting pics and await much ****-taking for doing everything the wrong way round, but hey, I'm on the Isle of Wight, and we do things differently over here!
I'm not going to have time to do a total re-build on the old girl - bits have been done over the course of the past couple of years and I'm fairly happy with the mechanical side of things -
The old girl is a G-reg 110 - the astute amongst you may notice it has 'Defender' on the front - this is because the front has been, at some stage, replaced.
You will also notice it has a 300TDi under the hood and the bulkhead is green...
Well, sort of dirty green....
So, the plan is to King / Double cab her, but as finding a roof is not as easy, I decide I wanted to at least do a basic tart-up and re-spray so its all one colour. If a DC roof pops up, I can simply add it into the mix.
Have done most of the welding required and now its time to sort out the bodywork and interior - as this is my work wagon, I can't strip it all down in one go sadly.
So, having seen the colour Aarron used on one of his many rebuilds, he told me it was Ford RS Blue - Cheers for that Chap! - Before making up my mind 100%, I decided to get a rattle can and try it out first - at £46/L +VAT I want to be sure!
So, off came the air flappy vents and they got a rub down from white - which evidently had been put on with a catapult - through the green and then sort of flat...
Coat of rattle can Etch Primer later:
Then decided that that may not be enough to decide, so had the front grill panel out, rubbed back and primed:
Then got bored and took the bonnet catch panel etc out as it looked grubby:
And cleaned up all the bits and gave them a coat of howsyourfather:
I will be putting a coat of the blue on the 3 panels tomorrow - I did a test spot on an old bit of tin and I do like the colour - as this is my 1st attempt at base colour and lacquer, I am not expecting it to be top bollock quality, which is why I chose 3 bits I can either re-do or hide!
In my mind, the interior is sorted... Grey lining and blue seats - I have found some seats I like here:
Sure someone will tell me I'm mad....
Will try and keep posting pics and await much ****-taking for doing everything the wrong way round, but hey, I'm on the Isle of Wight, and we do things differently over here!
