Having just picked up a pair of husky winches for a bargain price (both were listed as spares or repair) I need reminding how to test the motors please. I am currently not bothered about the solenoids etc that came with them as need to start more basic than that. I know the earth is the bolt on the bottom of the motor. And I have vague memories from when I did this last time of hooking up the positive to one of the terminals and then bridging it to another with a large screwdriver to test it?
There are three posts on the top of the motor colour coded and pictured below, red, yellow, and blue. My test battery is currently very very flat so first things is to charge that up. And I know one of them is 24volt so also need to work out how to get a second battery into the system without doing any harm (ie not one fitted to a vehicle)
There are three posts on the top of the motor colour coded and pictured below, red, yellow, and blue. My test battery is currently very very flat so first things is to charge that up. And I know one of them is 24volt so also need to work out how to get a second battery into the system without doing any harm (ie not one fitted to a vehicle)