Temp gauge bulb

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Zeroshift

Member
Posts
25
Location
Dorking, Surrey
As the title says - the bulb in the temp gauge has blow - could anyone advise on what bulb to get (before I've taken the dash apart and then found out I don't have the right one).

Also - is taking the dash off easy - what's involved?

Finally, the speedometer is just slightly at an angle (if it was a dartboard, the milometer is between 3 and 17). Not a problem, but it is just starting to irk me each time I look at it. Is there a way to rotate the instrument (a special tool or something) or is it something thats easy to do once the dash is out?

Many thanks

Mark
 
What landy do you have? Unless its an TDCI (i hope not) then turning the spedo round will be a ten second job when the dash is off - its held in by a couple of thumb screws - loosen turn to desired angle and tighten.

As for bulb it depends on when dash

As for how to remove - depends on what dash
 
Can't help with bulb there then sorry, but guage should be as described

i'm sure somebody else will be along soon with the answer.....:kettlepot:
 
Back
Top