L322 Td6 3.0, fuel filter

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

rich28uk

Well-Known Member
Posts
625
Location
Manchester
Hi everyone just about to service my td6 since I got it, just quick question are they fuel filters self priming since they have electric pumps? Or do they have to be filled first? Cheers
 
Thought about doing the same, when I had my disco 2 td5 that was self priming but had to either cycle ignition or think it was ignition and press accelerator 5 times and it started a priming process then once it had done making all sorts of noises it would fire up no problem.
 
All sorted, did as above, filled as much as possible with fuel from existing filter, cycled ignition twice the started and held revs at 1500 for few seconds, all good, no issues. thanks again for the advice.
 
Cycle the ignition à few times and run at 1500m2000rpm as saud to push any air out. I wouldn't refill from the old filter as it could have crap you could contaminate the clean filter.. ;)
 
Back
Top