TD5 wiper motor
- Thread starter peter2td5
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
landy1uk
Well-Known Member
- Posts
- 1,775
- Location
- Hertfordshire
Hi
In Rave just says Fit new motor to mountin plate and secure with bolts. Connect link to spindle tighten nut to 7nm 5.2lbf.ft
fit motor& linkage to body connecct multiplug tighen all bolts to 2.5nm1.8lbf.ft
In Rave just says Fit new motor to mountin plate and secure with bolts. Connect link to spindle tighten nut to 7nm 5.2lbf.ft
fit motor& linkage to body connecct multiplug tighen all bolts to 2.5nm1.8lbf.ft
Last edited:
