td5 speedo onto old v8 90
- Thread starter 90maniac
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
DEFENDER90-DAZ
New Member
- Posts
- 3,239
- Location
- Scotland - Houston
Yep makes the wiring up of the warning lights look very easy - might do it myself 
timtheenchanteruk
Well-Known Member
- Posts
- 4,633
- Location
- Leeds
warning lamps are an easy fix
use LED replacements no soldering or owt required.
Just dont put them in the indicator one (the indicator lamp seems to work both ways, so an LED will only work in one direction) or the high beam (its TOO chuffing bright) other than that, they are great.
Speedo I fitted these little gems popped the back of the speedo off, removed the green bit, and glued the back bit of the holder back on (it normally screws to the green bit) and hey presto, good lighting on the speedo.
not got anywhere wuith the other guages yet, just putting LED in doesnt work very well.
use LED replacements no soldering or owt required.
Just dont put them in the indicator one (the indicator lamp seems to work both ways, so an LED will only work in one direction) or the high beam (its TOO chuffing bright) other than that, they are great.
Speedo I fitted these little gems popped the back of the speedo off, removed the green bit, and glued the back bit of the holder back on (it normally screws to the green bit) and hey presto, good lighting on the speedo.
not got anywhere wuith the other guages yet, just putting LED in doesnt work very well.
