riscadisco
New Member
- Posts
- 62
Thred title says it all really. Just wondering if prevention can work. Noticed the suggestion on the other thred about oacking connections with silicon grease and started to wonder.
TD5 oil in the injector loom - how to stop it
- Thread starter riscadisco
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
battenberg
Well-Known Member
- Posts
- 2,101
- Location
- Birmingham UK
just clean it out with WD40, an air line and rags, then add some silicone grease.
or spend the £40 on a new loom...
or spend the £40 on a new loom...
Bushtoy
Well-Known Member
- Posts
- 1,998
- Location
- South Africa
will still get thru the silicone and grease.....wot we did on all our TD5's is drill a small weep hole at the plug on the head as well as the plug at the ECU [red one...yellow wires on the right o the plug] to prevent oil build-up. both plugs are also cleaned at every service. no probs so far.
Similar threads
