Td5 discovery Exhaust

Hi people
I want to fit a straight through exhaust to my disco do I need to remove the chassis cross members or can I fit it without removing them as I cant get them unfastened

Cheers

Winny,

Had no problems fitting mine (didnt remove anything).

What set up are you fitting out of curiosity?

I have a stainless downpipe and centre pipe with a standard tail pipe and back box which is now blown a few holes.

Around £40 for a replacement but just purchased a side exit straight through from ebay £100.

Hi Deano
Did you fit the down pipe from underneath .I am Fitting a straight thro exhaust taking the middle box out. Sorry about the late reply

Jack it up and chalk wheels leaving yourself enough room to get underneath with a few socket extentions, I used a long bar for leverage. I sprayed penetrating fluid on first as the bolts looked pretty rusty. Be careful you dont round them off.

If you have a helping hand like I did, get them to hold the gasket in place whilst you fit the bolts to the new downpipe.

Once thats done its a doddle from there to fit centre pipe.

If you need more help Winny ill upload some photos of mine.

Cheers pal photo would be good