TD4 'proper' oil capacity
- Thread starter bdd
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
howardo
New Member
- Posts
- 6,783
- Location
- In the woods
The proper way is to use your dip-stick.
chromiumuk
Well-Known Member
- Posts
- 2,203
- Location
- Earth
Howardos right here, the system takes around 6.5 litres - can't remember the exact figure. Problem is that the oil cooler setup sometimes retains over a litre probably depending on whether the car is totally level or slightly sloped which seems to be why everyone gets different amounts in.
My first oil change was done on ramps & the car wasn't perfectly level & it took just over 5 litres. The second time, I got it done at MOT time by a friend who was able to get it near level & it took the 6.5l.
Don't forget to use fully synthetic.
My first oil change was done on ramps & the car wasn't perfectly level & it took just over 5 litres. The second time, I got it done at MOT time by a friend who was able to get it near level & it took the 6.5l.
Don't forget to use fully synthetic.
howardo
New Member
- Posts
- 6,783
- Location
- In the woods
Haynes says:
6.8 litres if refilling after draining. If filling from dry add another 0.4 litres.
Difference between Min and Max on dipstick is 1 litre.
6.8 litres if refilling after draining. If filling from dry add another 0.4 litres.
Difference between Min and Max on dipstick is 1 litre.
howardo
New Member
- Posts
- 6,783
- Location
- In the woods
If you're not changing the filter that will still have some oil in it aswell
disco_mikey
Active Member
- Posts
- 728
- Location
- Dundee, Scotland
5.8 litres in every single one I have ever done takes it pretty much the maximum mark...
