TD4 inlet manifold??

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

davew13

Member
Posts
66
Just a quick question I assume all the freelander 1- td4 inlet manifolds are the same. The reason I ask is I fancy cleaning mine out after seeing the inside of the EGR when I fitted the bypass recently, I was thinking about buying one to have as a spare clean just to refit.

They seem cheap enough off EBay etc. Mines a 56 plate facelift.

Am I correct that they're all the same??
Thanks
Dave
 
Hi Dave,
Yes they are the same also the Rover 75 ones are the same ;) Freelander ones are almost twice the cost of the R75
Rover 75 inlet manifold 2l d | eBay


You can also replace the rubber gaskets if you so wish but you do not need to as the old ones should be ok, link below also make sure you remove the MAP sensor before cleaning the inlet manifold, oven cleaner and a good jet wash ;)
8510218 | GASKET INLET MANIFOLD TD4 FREELANDER 1 | Allmakes | Freelander - 1996 to 2006 | Britcar (UK) Ltd

LKJ101130L | GASKET INLET MANIFOLD TD4 FREELANDER 1 | Allmakes | Freelander - 1996 to 2006 | Britcar (UK) Ltd

Four of each above needed if you add new ones.

One of these
LKJ000070 | O RING INLET MANIFOLD EGR M51 NRR | Land Rover | Freelander - 1996 to 2006 | Britcar (UK) Ltd
 

Attachments

  • 1ewbc3.jpg
    1ewbc3.jpg
    42.7 KB · Views: 562
  • k4azw1.jpg
    k4azw1.jpg
    44.7 KB · Views: 1,347
  • SDC19087.JPG
    SDC19087.JPG
    158.2 KB · Views: 391
  • SDC19088.JPG
    SDC19088.JPG
    161.7 KB · Views: 430
  • SDC19089.JPG
    SDC19089.JPG
    171.7 KB · Views: 388
  • SDC19092.JPG
    SDC19092.JPG
    92.5 KB · Views: 432
  • SDC19095.JPG
    SDC19095.JPG
    261.1 KB · Views: 375
  • SDC19097.JPG
    SDC19097.JPG
    283.7 KB · Views: 400
  • SDC10893.JPG
    SDC10893.JPG
    315.3 KB · Views: 650
  • SDC19051.JPG
    SDC19051.JPG
    360.5 KB · Views: 464
Back
Top