Nigelnorbert
New Member
- Posts
- 4
hi does anybody know off hand the size of the torx socket needed to remove propshaft?
Many thanks.
Many thanks.
Td4 facelift prop
- Thread starter Nigelnorbert
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Alibro
Well-Known Member
- Posts
- 7,028
- Location
- Northern Ireland
I just use a 1/4" hex socket. Can't remember the size but probably 8mm and 10mm depending on whether front or back.
Done three now and no problems. If you insist on using torx sockets make sure they are 1/4" or 3/8" as my 1/2" torx are too wide to fit.
Done three now and no problems. If you insist on using torx sockets make sure they are 1/4" or 3/8" as my 1/2" torx are too wide to fit.
4x4Dog
Active Member
- Posts
- 122
- Location
- North Wales
10mm.
Similar threads
