Freelander 1 TD4 auto undertray

mbrokof · Aug 13, 2022

Hello All,

I thought to get a thread cutter for the nuts of the undertray. In the catalog it says for FS110257 = M10x25. Is that really what I need to cut the threads as I could only find M10x1.5 so far and from remembering it looks more like that Amazon product
KR
Matthias

pwood999 · Aug 13, 2022

25 is the length of the bolts. Undertray on wife's TD4 is in my garage at moment, so will measure them later for you.

Nodge68 · Aug 13, 2022

Your thread tap at M10 X 1.5 is fine.
Thread is 10mm diameter, with a pitch of 1.5mm.

pwood999 · Aug 13, 2022

Nodge68 said:
Your thread tap at M10 X 1.5 is fine.
Thread is 10mm diameter, with a pitch of 1.5mm.

+1, just measured mine, and definitely M10x1.5

mbrokof · Aug 13, 2022

Thanks @Nodge68 & @pwood999 now at least I know what it's called in English:-D. Couldn't find my caliper either. Don't know why it's not just in the catalog to make it easier.

Freelander 1 TD4 auto undertray

mbrokof

Active Member

pwood999

Well-Known Member

Nodge68

Well-Known Member

pwood999

Well-Known Member

mbrokof

Active Member

Similar threads