Swivel to axle dowel bolt

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Galladog

Well-Known Member
Posts
704
Location
Alloa
Hi all, I'm wondering which hole the dowel bolt UYG500040 fits in.
All the bolt heads were corroded so I had to cut them off, I have looked at the opposite side but again the bolt heads are so corroded I can't tell which one is the dowel bolt.
Cheers Galladog
 
The Dowel bolt is slighly larger on the shank but the actual bolt heads and threads are the same diameter once you have the swivel off the bolt will only fit in one hole
 
The Dowel bolt is slighly larger on the shank but the actual bolt heads and threads are the same diameter once you have the swivel off the bolt will only fit in one hole
Thanks TorsionBhudda, but just to confuse matters the dowel bolts I have which came in a genuine parts bag have a 13mms head and the other bolts have a 17mm head !
 
The Dowel bolt is slighly larger on the shank but the actual bolt heads and threads are the same diameter once you have the swivel off the bolt will only fit in one hole
Just been and checked, the dowel bolt fits in two holes !
One at 12 o'clock and one at 8 o'clock !!!
 
12 O'clock ring a bell with me it's possible that someone drilled out the hole that's at 8 o'clock. I would fit the dowel at 12o'clock
I found a post on another forum which says that the bolt fits at 12 o'clock.
swivel pins/bearings are done, but it's dark outside and raining so I'm going to fit everything tommorow and bleed the brakes.
I also cut a slot in the brake pipe bracket so I don't have to disconnect the brake line in the future.
thanks for your help TorsionBhudda.
 
I found a post on another forum which says that the bolt fits at 12 o'clock.
swivel pins/bearings are done, but it's dark outside and raining so I'm going to fit everything tommorow and bleed the brakes.
I also cut a slot in the brake pipe bracket so I don't have to disconnect the brake line in the future.
thanks for your help TorsionBhudda.

No problem at all. Definitely not the weather for working on Landy outside luckily I have a large garage to work in lol Unfortunately having to work outside on nightshift :(
 
No problem at all. Definitely not the weather for working on Landy outside luckily I have a large garage to work in lol Unfortunately having to work outside on nightshift :(
yeah I saw the photo of your garage..... When I win the lottery !
 
Back
Top