swivel housing

i am restoring a series 1 1958 88" after 20 years it just starting to come back together
i have put new oil in axles./gearbox/engine/overdrive and steering box but now the swivel housing has started leaking from the back, how do i put seals and gaskets on
i live between hull and goole if anyone can help
(i dont have the computer on all the time so will reply to replies as soon as i can) or anyone could ring 01430448382

yu mite find you ge a better response in the series section


mods please move.

raise:

Silly old Daft....its already been moved

Not sure if its the same on a Series 1 but on a Series 2 you can loosen the bolts on the inside of the wheel,cut the old
seal in half and remove,then cut the new seal in half,place around the swivel ball,screw the spring that's in the seal back together around the swivel,and glue the seal together on the top.Just make sure the swivel balls is in good condition.