switches

I got my new spot lights wired up yesterday they come on with fullbeams and I have an extra switch that must be on first before they work. The extra switch is beside the fog light and hazard light switchs there was a blank space there. The problem is the new switch the only one they had that would fit is sure to get broken on my knee before long I think Ill get another fog light switch would that work and would I need to get the connector also.

just solder onto the tags at the back on the switch and insulate

Thanks that switch will work then

slim jim said:

Thanks that switch will work then

Click to expand...

yep

Sean said:

just solder onto the tags at the back on the switch and insulate

Click to expand...

dont yu fookin dare!

bodgers ****in united!

The Mad Hat Man said:

dont yu fookin dare!

bodgers ****in united!

Click to expand...

oh go on then tell me why this is so wrong

Just use the correct terminals.

The Mad Hat Man said:

Just use the correct terminals.

Click to expand...

where do you get those from ? - the round types that i've only ever seen within a multi conn socket on a landy loom

another deepender / scrappy/ or just buy a rocker switch, rather than one with a stem?

if he is gonna get another fog switch from a scrappy - make sure yu get the rear fitting and as much cable as poss.

The Mad Hat Man said:

another deepender / scrappy/ or just buy a rocker switch, rather than one with a stem?

Click to expand...

yep been down that route before - dead looms that peeps dont mind you hacking at are very hard to find

just looks better having an orginal LR switch rather than a halfords cheapo

Its an odd size switch halfords dont do em. 5.75 new from main stelers about the same for the connector I have to wait a week though as its not in stock

there's plenty of orginal LR depender switchs on ebay