R
Rock Braud
Guest
I am getting ready to re-install my 4wd Suzuki Sidekick's 1.6L engine
following a rebuild. I already removed the maunal
transmission/transfer case "thingy" and have it laying on the floor.
This was not an easy task.
I would like to mate the transmission/transfer case to the engine
while it is out of the vehicle then lift both of them and install them
into the vehicle in one step.
I am concerned the lifting tabs connected to the exhaust and intake
manifolds might not be strong enough to support he weight of both the
engine AND the tranny.
Has anybody lifted both the engine and the 4wd tranny with the stock
lifting tabs? Are they upd to the task?
Thanks.
following a rebuild. I already removed the maunal
transmission/transfer case "thingy" and have it laying on the floor.
This was not an easy task.
I would like to mate the transmission/transfer case to the engine
while it is out of the vehicle then lift both of them and install them
into the vehicle in one step.
I am concerned the lifting tabs connected to the exhaust and intake
manifolds might not be strong enough to support he weight of both the
engine AND the tranny.
Has anybody lifted both the engine and the 4wd tranny with the stock
lifting tabs? Are they upd to the task?
Thanks.
