suspension fitment

haigy · Mar 30, 2012

My 94 300tdi needed a lift so I ordered one for the spec of car.d1 to 98rrc and defender 2 inch spring and procomp struts.delivered and got all excited and looked at it and noticed the bolt on the standards is slightly smaller than the procomp.do they still fit the turret holes or do I ah drill it bigger.or have I got wrong kit.

Any help welcome

1968unclefester · Mar 30, 2012

hi mate
ive fitted 2 sets of procomp springs/shocks on disco's with no drilling to mounts
the shocks were pro comp explora

haigy · Mar 31, 2012

Cheers mate ol give it a shot then.these are procomp es9000 struts so just hope the hole big enough

alex8882 · Mar 31, 2012

it will be matey, i've the same shocks on mine, fitted with no problems or drilling. you may find that over the years that the holes have become slightly elongated anyways. What you might find is that whenb you come to fit the front shocks into the spring seat on the axle, is that once the shock is on, is that you won't be able to get the nut and washer in. So what i did was to have the nut and washer in place then allow the shocker to drop through. I only say might have this problem thou

haigy · Mar 31, 2012

Nice one pal can't wait get it on then just me snorkel to do then.

alex8882 · Mar 31, 2012

ha ha no probs just waiting on my poly bush kit and 75mm arches to be delivered here is mine upto now:

suspension fitment

haigy

Well-Known Member

1968unclefester

New Member

haigy

Well-Known Member

alex8882

Well-Known Member

haigy

Well-Known Member

alex8882

Well-Known Member

Similar threads