Suspension conversion on a Series 3
- Thread starter barndogg
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Langers
Well-Known Member
- Posts
- 3,162
- Location
- Kent or Shropshire
Unless there is a very specific reason you want coilies, I'd recommend you just replace all of your leaf springs with parabolics which afford a smoother ride and better articulation. 
Last edited:
G-man
BBQ king
- Posts
- 12,065
- Location
- essex.... in the middle somewhere
its a **** of a job to do and not worth it (you would have to get your landy Qplated IF it passes an IVA)
i looked into doing it on my series the amount of work thats involved makes it not worth it you need to
add spring mounts, add radius arm and trailing arm mounts, add a panhard rod mount, add a cross member to hold the A frame, if any of your measurements are slightly out it will handle like a pig and be dangerous
oh and if you get pulled by VOSA it will be crushed unless you have put it through an IVA
i looked into doing it on my series the amount of work thats involved makes it not worth it you need to
add spring mounts, add radius arm and trailing arm mounts, add a panhard rod mount, add a cross member to hold the A frame, if any of your measurements are slightly out it will handle like a pig and be dangerous
oh and if you get pulled by VOSA it will be crushed unless you have put it through an IVA
hughesy
Well-Known Member
- Posts
- 4,200
- Location
- Isle of Anglesey
Buy a 90.
Similar threads
