RRkev
Active Member
- Posts
- 430
- Location
- Forest of Dean, Gloucestershire
hi guys have a very slight issue with my steering coloumn to rack alignment, my upper steering colums is approx 10 degrees out to the left when steering rack in in centre position.
so far i have checked the uj on the bottom on the upper coloumn this is master splined so will only fit one way, same on the rubber joint inbtween the bulk heads and today i find the steering rack is also master splined!
i bought the current lower shaft assembly used is it possible it may have been split on the telescoping part and mis aligned or have i missed something elsewhere?
so far i have checked the uj on the bottom on the upper coloumn this is master splined so will only fit one way, same on the rubber joint inbtween the bulk heads and today i find the steering rack is also master splined!
i bought the current lower shaft assembly used is it possible it may have been split on the telescoping part and mis aligned or have i missed something elsewhere?
