steering box on a 110

R

Robbo21

New Member

Posts

1

• Jun 4, 2015

• #1

Hi I am a new member and have a leaking steering box on my 110CSW.Is it a large job that can be tackled by a lay person?. Alternatively could any body recommend a specialist in the Heathrow area. Many thanks

 

Marmaduke

Well-Known Member

Posts

9,773

Location

Near the land of 'Me Duck'

• Jun 4, 2015

• #2

Welcome to the forum Rob, what do you have in mind? Are you looking at replacing the seals in your leaking steering box or replacing the whole box with a recon one. The second is the more expensive but only needs to undo a handful of nuts and bolts and getting the pitman arm off can be a bit cheeky but certainly do-able for most people in a couple of hours, personally I've never rebuilt a box so couldn't advise but do a search in the defender section as I'm sure others have

 

flat

Well-Known Member

Posts

9,075

Location

Far away from you!!

• Jun 4, 2015

• #3

Took me about an hour or so to swap out one box for another and I am a ham fisted monkey.

 

v8geoff

Well-Known Member

Posts

3,327

Location

chippenham,wiltshire

• Jun 5, 2015

• #4

Hello and welcome the arm is a pig to get off

 

R

rupert092

Member

Posts

93

Location

NEWPORT SOUTH WALES

• Jun 5, 2015

• #5

I did the seals on mine last week, The arm came off easily with help of a Pitman arm puller off Ebay £9.95. If you get the puller off Ebay make sure you buy the one with 33mm throat. get Corteco seals £5.95.